產品優勢Product advantages

■ 0~7Bar低壓操作Noil 0~7Bar low pressure operation

■ 耗材少、價格經濟Noil consume material less, price economy

■ 小噴射量0.002微升Noil injection amount of 0.002 microliter

■ 非接觸式、無針頭設計Noil contact type without needle design

■ 大噴射速度 1000次/秒The injection speed is 1000 times per second

■ 高精度（體積誤差1%以內）High accuracy (within 1% of volume error)

■ 壓電式驅動器，可軟體校正A piezoelectric actuator can be calibrated

■ 噴嘴可耐熱，且溫度分布均勻

The nozzles can be heat-resistant and evenly distributed

■ 采用快拆式噴嘴設計，可電子調整

The nozzles are designed with quick split nozzle and can be adjusted electronically

■ 1~2,000,000mPas粘稠度適用性廣Noil 1~2 million mPas have wide applicability

微量噴射閥型號     MDS3200A Micro-injection valve type MDS3200A

適用介質：SMT 粘合劑（包含高硬度顆粒的導電膠），硅膠，底部填充膠等高粘度介質

Suitable medium : SMT adhesive (including conductive adhesive with high hardness particles), silica gel, bottom filling glue, high viscosity medium

小噴射量 2nl（根據液體介質有所不同）

Small jet amount of 2nl (depending on the liquid medium)

粘度適用范圍：0-200，000mPas Viscosity applicable range 0-200,000 mPas

頂桿類型 : 根據客戶要求配備

The top bar type is equipped according to customer requirements

供液壓力:0-8Bar Supply pressure 0-8 bar

大噴射速度 : 1000次/秒 Big jet velocity 1000 times/SEC

平均噴射速度：250次/秒 Average jet speed is 250 times per second

工作溫度 10-50度：Work temperature: 10-50 degrees